Blog

How to Fix Windows 10 Stuck on Windows Logo Screen: Effective Troubleshooting Steps

Windows 10 getting stuck on the logo screen can be frustrating and prevent you from accessing your desktop. This issue often happens during startup when the system cannot load correctly. Fortunately, there are several simple steps you can take to troubleshoot and fix this problem.

In this guide, we will walk you through easy, effective methods to resolve the Windows 10 stuck on the logo screen issue. Each step is explained clearly to help even beginners follow along.

Before diving into complex solutions, it is best to try the basic fixes first. This way, you might solve the problem quickly without any technical hassle.

Let’s get started and help your computer boot up normally again.

Quick Note: Prerequisites and Checks Before You Begin

  • Disconnect External Devices: Remove all USB drives, external hard disks, printers, or other peripherals connected to your PC. Sometimes, these devices interfere with startup.
  • Power Supply Check: Make sure your computer is properly plugged in and has a stable power source. Avoid using faulty power adapters or batteries.
  • Patience: Occasionally, Windows might take longer to start if updates are being configured. Wait at least 10-15 minutes before assuming it is stuck.
  • Backup Data: If possible, ensure your important files are backed up to avoid data loss during troubleshooting.

Step 1: Perform a Simple Restart

Sometimes, the issue is temporary and can be fixed by restarting your computer.

  • Press and hold the power button until your PC turns off completely (about 5-10 seconds).
  • Wait for 30 seconds, then press the power button again to turn it back on.

This step clears temporary glitches that may cause Windows to freeze on the logo screen.

Step 2: Boot into Safe Mode

Safe Mode starts Windows with only the essential drivers and services. This helps identify if a third-party app or driver is causing the problem.

  1. Turn off your PC by holding the power button.
  2. Turn it on, and as soon as the Windows logo appears, hold the power button again to force shutdown.
  3. Repeat this process 2-3 times until you see the Automatic Repair screen.
  4. On the Automatic Repair screen, select Advanced options.
  5. Go to Troubleshoot > Advanced options > Startup Settings.
  6. Click Restart.
  7. After restart, press 4 or F4 to boot into Safe Mode.

If Windows starts successfully in Safe Mode, it means there might be a problematic driver or program causing the issue.

Step 3: Disable Fast Startup

Fast Startup is a feature designed to reduce boot time, but it can sometimes cause boot problems.

  1. In Safe Mode, open Control Panel.
  2. Go to Hardware and Sound > Power Options.
  3. Click on Choose what the power buttons do on the left menu.
  4. Click Change settings that are currently unavailable.
  5. Uncheck the box next to Turn on fast startup (recommended).
  6. Click Save changes and restart your PC normally.

Disabling Fast Startup can resolve conflicts during boot that cause freezing.

Step 4: Run Startup Repair

Startup Repair is a built-in Windows tool that automatically fixes common startup problems.

  1. Access the Automatic Repair screen as described in Step 2.
  2. Choose Advanced options > Troubleshoot > Advanced options > Startup Repair.
  3. Select your user account and enter the password if prompted.
  4. Let Windows scan and repair any startup issues.

This tool diagnoses and fixes missing or damaged system files that prevent Windows from booting.

Step 5: Use System Restore

If the problem started recently, restoring your system to an earlier point can help.

  1. From the Advanced options menu, select System Restore.
  2. Pick a restore point dated before the issue began.
  3. Follow the on-screen instructions to complete the process.

System Restore reverses recent changes without affecting your personal files.

Step 6: Check and Repair Disk Errors

Corrupted files on your hard drive can cause boot problems. You can check and fix disk errors using Command Prompt.

  1. In the Advanced options, open Command Prompt.
  2. Type the following command and press Enter:
chkdsk /f /r C:

This command scans for and repairs disk errors on your C: drive (where Windows is usually installed). It may take some time to complete.

Step 7: Reset Your PC

If none of the above solutions work, you can reset Windows 10 to its default state. This option lets you keep or remove your files.

  1. Go to Advanced options > Troubleshoot > Reset this PC.
  2. Choose either Keep my files or Remove everything.
  3. Follow the instructions to reset Windows.

A reset can fix serious system issues but may require reinstalling some apps.

Frequently Asked Questions (FAQs)

Why does Windows 10 get stuck on the logo screen?

This can happen due to corrupted system files, incompatible drivers, failed updates, or hardware issues interfering with startup.

Can I fix this issue without losing my data?

Yes, many troubleshooting steps like Safe Mode, Startup Repair, and System Restore do not delete your files.

How long should I wait on the Windows logo screen before taking action?

If it stays stuck for more than 15-20 minutes without any progress, it’s safe to start troubleshooting.

Is it safe to force shutdown my computer while stuck?

Occasionally, a forced shutdown is necessary to reboot. However, avoid doing it repeatedly as it can cause disk damage.

What if my PC won’t even reach the Automatic Repair screen?

In this case, you might need to create a Windows 10 installation media on a USB drive to repair or reinstall Windows.

When Nothing Works

If you have tried all the steps above and your Windows 10 PC is still stuck on the logo screen, consider the following final options:

  • Use Windows Installation Media: Download the official Windows 10 Media Creation Tool from Microsoft’s website and create a bootable USB to repair or reinstall Windows.
  • Consult Professional Help: Hardware problems like a failing hard drive or RAM may require a technician’s assistance.
  • Visit Official Support: Microsoft Support offers detailed guides and assistance for startup issues: https://support.microsoft.com/en-us/windows

Conclusion

Windows 10 getting stuck on the logo screen is a common problem that you can often fix with simple troubleshooting steps. Start by restarting your PC and disconnecting external devices. If that doesn’t help, use Safe Mode to identify driver issues, disable Fast Startup, and run Startup Repair.

For persistent problems, System Restore, disk checks, or resetting Windows are effective solutions. Always back up your data before performing advanced fixes.

By following this guide carefully, you can restore your system to normal and avoid data loss. Remember, if you are unsure or uncomfortable with any step, seeking professional help is a safe choice.

Leave a Reply