Blog

How to Fix “Netsh Int IP Reset Access Denied” Error on Windows 10: Step-by-Step Solution

If you are trying to reset your IP settings using the netsh int ip reset command on Windows 10, you might encounter the frustrating “Access Denied” error. This error stops you from completing the reset and fixing network issues.

Don’t worry, this problem can be solved with some straightforward steps. You just need to give your computer the right permissions to run the command successfully.

In this guide, we will walk you through simple and clear instructions to fix the “Netsh Int IP Reset Access Denied” error on your Windows 10 PC.

By following these steps carefully, you can regain control of your network settings and resolve connection problems.

Quick Note: Prerequisites and Checks

  • Administrator Rights: The netsh int ip reset command requires administrator privileges. Make sure you are logged in as an administrator or have the admin password.
  • Windows Updates: Confirm that your Windows 10 system is up to date. Sometimes, outdated system files cause permission issues.
  • Antivirus and Firewall: Temporarily disable your antivirus or firewall if they block system commands.
  • Command Prompt Access: Use the Command Prompt (CMD) and not PowerShell or other terminals for this command to avoid compatibility issues.

Step 1: Open Command Prompt as Administrator

This is the most common cause of the “Access Denied” error. If you run the command prompt without administrator rights, Windows will not allow you to execute network reset commands.

  1. Click the Start button or press the Windows key.
  2. Type cmd in the search box.
  3. Right-click on the Command Prompt app from the results.
  4. Select Run as administrator.
  5. If prompted by User Account Control, click Yes to allow.

Now, in this elevated Command Prompt window, try running your command again:

netsh int ip reset

This often fixes the error immediately because the command has enough permissions to make system changes.

Step 2: Disable User Account Control (Temporarily)

If running as administrator does not work, User Account Control (UAC) might be restricting the command. Temporarily lowering UAC settings can help.

  1. Press Windows + R to open the Run dialog.
  2. Type Control Panel and press Enter.
  3. Go to User Accounts > Change User Account Control settings.
  4. Move the slider down to Never notify.
  5. Click OK and restart your computer.
  6. After restart, open Command Prompt as administrator again and run the command.

Note: Remember to re-enable UAC after you are done. UAC protects your system from unauthorized changes.

Step 3: Check File and Folder Permissions

The netsh command writes log files during the reset process. If Windows denies access to these files or folders, you may get the error.

  1. Open File Explorer and navigate to C:WindowsSystem32.
  2. Locate the folder named LogFiles or the folder netsh inside this directory.
  3. Right-click the folder and select Properties.
  4. Go to the Security tab.
  5. Make sure your user account or the Administrators group has Full Control.
  6. If not, click Edit and add the proper permissions.
  7. Click Apply and then OK.
  8. Try running the reset command again in an admin Command Prompt.

Step 4: Run System File Checker (SFC) to Repair Corrupt Files

Corrupted system files can interfere with Windows commands. Running SFC helps detect and fix these problems.

  1. Open Command Prompt as administrator.
  2. Type the following command and press Enter:
sfc /scannow

This scan may take several minutes. Once complete, it will automatically repair corrupted files.

Restart your PC and try the netsh int ip reset command again.

Alternative Method: Use Windows PowerShell with Elevated Rights

If Command Prompt still gives you trouble, you can try Windows PowerShell instead.

  1. Click the Start button, type PowerShell.
  2. Right-click Windows PowerShell and select Run as administrator.
  3. Enter the following command:
netsh int ip reset

PowerShell supports the same commands and running it as admin can sometimes bypass permission issues.

Frequently Asked Questions (FAQs)

Why do I get “Access Denied” when running netsh commands?

This usually happens because the command prompt is not running with administrator privileges or Windows security settings block the command.

Can antivirus software cause this error?

Yes, some antivirus or firewall programs block system commands. Temporarily disabling them can help diagnose the issue.

Is it safe to disable User Account Control?

Disabling UAC temporarily is generally safe for troubleshooting, but you should re-enable it afterward to protect your system.

What if the netsh command still does not work after all steps?

There may be deeper system problems. Running a Windows repair or reinstalling network drivers might be necessary.

Can I reset IP settings using other tools?

Yes, you can reset network adapters via the Windows Settings > Network & Internet > Status > Network reset, but netsh is often faster and more thorough.

When Nothing Works: Final Resort Options

If you have tried all the above steps and still face the “Access Denied” error, consider these last options:

  • Reset Network Settings via Windows Settings: Go to Settings > Network & Internet > Status, then click Network reset. This resets all network adapters.
  • Update or Reinstall Network Drivers: Use Device Manager to uninstall and reinstall your network adapter drivers.
  • Perform System Restore: Restore your PC to a previous state where the command worked.
  • Contact Microsoft Support: Visit the official Microsoft support website for advanced help and troubleshooting tools.

Conclusion

The “Netsh Int IP Reset Access Denied” error on Windows 10 is mainly caused by insufficient permissions or security settings. By running Command Prompt as an administrator, checking permissions, and temporarily adjusting User Account Control, you can usually fix the problem quickly.

Remember to run system scans like SFC and consider alternative methods like PowerShell if needed. If all else fails, Windows offers built-in network reset options and driver management tools to help you regain network functionality.

Following these detailed and easy steps will get your IP reset command working again and help resolve many common network issues on your Windows 10 PC.

Leave a Reply